2.4GHZ High Power Wireless Outdoor CPE The APe 2400e is a 2.4GHz Band wireless point to point bridge that is capable of sustaining up to 30.. Product #: APe2400e

APe2400e

2.4GHZ High Power Wireless Outdoor CPE

The APe 2400e is a 2.4GHz Band wireless point to point bridge that is capable of sustaining up to 300Mbps data rates through its 5 dBi omni directional antenna and has more capacity than other competing access points at unprecedented price.

Key Features:

  • Support multiple operation modes: AP/Bridge/Client/AP+Bridge
  • Add-on virtual controller mode: Simple centralized Management, Auto AP discovery and provisioning, truly plug and play
  • Wireless authentication: Open/Shared/802.1x/WPA/WPA2/PSK
  • Portal http redirect for WISP

Equipped with a FAT and THIN AP mode, this point to point bridge is capable of providing flexible operating modes that allows your APe 2400e to be configured individually or deployed through a network completely utilized and maintained by an access point controller for a smarter and more convenient way of configuration.

In addition, the APe 2400e is equipped with a Load Balancing feature which allows this point to point bridge to effectively maximize its performance by equally dividing wireless connected clients to other access points within range. Spectrum Navigation has also been uniquely provided to allow the access point to direct clients to the channel with least congestion.

In terms of deployment, the APe 2400e is equipped with a passive PoE port, allowing you to utilize ethernet cables for both power and data, successfully reducing deployment cost with simpler installation and easy placement in optimal locations. Moreover, the APe 2400e is sleekly designed for flexible installation, combining aesthetically pleasing design with its flexible mounting kit through steel cable tie.


Centralized Forwarding Architecture

Aztech AP Controller series’ centralized forwarding architecture provide following benefits:

  • All AP management and client data traffic are sent to the AC through the secure CAPWAP tunnel. Then AC forwards the wireless data traffic to the outbound network and vice versa.
  • Unified, secure wireless traffic management. 

 


Auto RF Provisioning

Auto Channel Selection 

  • Automatically select proper channel and assign to managed APs 
  • Readjust channels by schedule (ex. at certain time, upon a certain interval)
  • When inserting new AP, the AP scans the RF area for occupied channels and selects a channel from the available non-interfering, or clear channels. 

Auto Transmit Power Adjustment

  • Automatically adjust the power according to the strength changes of RF signals broadcasting by other APs


 Authentication and Authorization

  • Access Control by VLAN or SSID
  • URL Black & White List
  • User authentication through RADIUS server
  • User portal authentication control through built-in or external portal server
  • Wireless Authentication: Open/Shared/802.1x/WPA/WPA2/PSK

Chipset Solution

  • CPU: AR9342 
  • RF: AR9342 

Flash

  • 16Mbyte

Memory (DDR II)

  • 64Mbyte

Standard compliance

  • IEEE802.3u MDI / MDIX 10/100 Fast Ethernet
  • IEEE802.11b/g/n wireless LAN interface
  • IEEE 802.11n wireless LAN standard

Power Input Requirement

  • Passive PoE 15V
  • Pin 4,5 VDC+
  • Pin 7,8 VDC

CPU Rate

  • 400MHz

Ethernet PHY

  • 10/100 Mbps

Antenna

  • Default external 5 dBi Omni antenna

Antenna Frequency band

  • 2.4~2.5GHz

Antenna Connector

  • SMA x2

LAN Port

  • 1 port

Reset Button

  • Reset to factory default

Ground

  • Ground terminal x1

System Update Capability

  • Support Web-UI upgrade via Ethernet port or wireless network
  • Support TFTP upgrade via Ethernet port

LED Definition

Power (Single-color LED x1)

  • Green On: Power / system on
  • Green Off: Power / system off

LAN (Single-color LED x1)

  • Off: No Ethernet connection detected
  • Green On: Ethernet connection detected
  • Green Blinking: Sending / receiving data

5G WLAN (Single-color LED x1)

  • Green Off: WLAN disabled
  • Green On: WLAN enable
  • Green Blinking: WLAN data transmit

Signal *3 (Single-color LED x3)

  • Excellent: 3 LED Green ON
  • Good: 2 LED Green ON
  • Weak: 1 LED Green ON

Data Rate

  • 11b: 11M, 5.5M, 2M, 1Mbps
  • 11g: 54M, 48M, 36M, 24M, 18M, 12M, 9M, 6Mbps
  • 11n: HT20 MCS0~15 | HT40 MCS0~15

Data modulation type

  • DSSS/BPSK/QPSK/CCK/DQPSK/DBPSK
  • 802.11b/g/n: OFDM
  • 802.11n: OFDM

RF frequency range

  • FCC: 2.412 GHz ~ 2.462 GHz
  • CE: 2.412 GHz ~ 2.472 GHz

Power Consumption (W)

  • <12W

Average Output Power@ 25˚ (Single Chain) (± 2dBm)


Sensitivity (at single chain)


Physical Specifications

  • Dimension: 205mm(L)×64mm(W) ×61mm(H)
  • Weight: ≤ 500g
  • Enclosure: IP55

Environmental Specifications

  • Operating Temperature(Max): -20° ~ +70°C (device) | 0° ~ +40°C (power adapter)
  • Operating Humidity (non-condensing): 10 to 95% RH (device) | 20 to 85% RH (power adapter)
  • Storage Temperature: -40 ~ +70°C (device) | -20 ~ +60°C (power adapter)
  • Storage Humidity (non-condensing): 10 to 95% RH (device) | 5 to 95% RH (power adapter)