Dual band 2x2 Indoor Wireless Access Point The high performance APi2750D is a mountable indoor wireless access point which complies to the 802... Product #: APi2750D

APi2750D

Dual band 2x2 Indoor Wireless Access Point

The high performance APi2750D is a mountable indoor wireless access point which complies to the 802.11n wireless standard. Operating at both 2.4GHz and 5.0GHz frequencies and supporting a maximum data rate of 300Mbps for both 2.4GHz and 5.0GHz, the APi2750D is the ideal partner for highly populated locations and bandwidth conducive applications such as Voice and AV Streaming.

Key Features:

  • A Policy-Based Setup that fits your organization’s needs
  • Scalability at its finest 
  • Cost-effective Staff Delegation 
  • Fast, Reliable, and Ubiquitous Wireless Connectivity within vicinity 

The APi2750D also offers reliable operating modes which are fully capable of providing for your network management and deployment needs. Depending on your network need, APi2750D can either be used as wireless access point, or as a managed access point that can be controlled by Aztech AP controllers. Through its FAT or THIN AP modes, you can easily manage the deployment of the APi2750D which would best fit your network need.

Equipped with 802.11n 2T2R (MIMO) technology and a dual-band concurrent feature, Aztech APi2750D is capable of providing speeds of up to 600Mbps rates and is capable of providing your network needs reliably at a cost-effective price, making this device a must have choice for your network’s continually growing scale.


 

 

 

  • Perfectly fast, seamless, and entirely reliable ubiquitous Wi-Fi coverage for organizations
  • Ultimate centralized control of wide scale area networks 
  • Centralized system exhibits monitoring, account generation, and other control-oriented capabilities 
  • Involves effortless install-and-leave setup and hassle-free installation of Access Points and other devices 
  • Utilizes the effective combination of Thin Access Points and an Access Point Controller to greatly implement and prioritize absolute management and control

 

 

 

 

 

 

 

 

 

 

 

Warranty Information
* 2 years

Chipset Solution

  • CPU: AR9342 + AR9382
  • Ethernet PHY: AR8035

SPI Flash

  • 16Mbyte

Memory (DDR II)

  • 64Mbyte

Standard compliance

  • IEEE802.3u MDI / MDIX 10/100 Base-T Ethernet
  • IEEE 802.ab 1000 Base-T Ethernet
  • IEEE802.11a/b/g wireless LAN standard
  • IEEE 802.11n wireless LAN standard

Interfaces

  • 1 RJ45 support 10/100/1000Mbps
  • 1 Reset button
  • 1 DC Jack

Ethernet Interface

  • 10/100/1000 BASE-T RJ-45 Ethernet connector

Antenna

  • 2 * 2.4GHz 5dBi PCB antennas
  • 2 *5.0GHz 5dBi PCB antennas

Antenna Connector

  • 4 * U.FL connector

PoE support

  • IEEE 802.3at support (Class4)

Reset button

  • Reset to factory default

HW Watchdog

  • IC EM6324QYSP5B(Cycle detection time:25s)

Front Panel LED definition

LED17: LED1 Green ( Power):

  • Off: Power/ system off
  • On: Power/ system on

LED17: LED1 Green ( Power):

  • Off: Power/ system off
  • On: Power/ system on

LED18: LED2 Green (RF1 -> 2.4G)

  • Off: WLAN disabled
  • On: RF in-active (system boot-up finishes)
  • Blinking: Data TX/RX through wireless access point

LED19: LED3 Green(RF2 ->5.0GHz)

  • Off: WLAN disabled
  • On: RF in-active (system boot-up finishes)
  • Blinking: Data TX/RX through wireless access point

LED20: LED4 Green(LAN)

  • Off: LAN link-down
  • On: LAN link-up

Power supply

  • Support POE 802.3at
  • Support +48V PTE

Power requirement

Support POE 802.3at

  • Output: +48V DC@0.5A
  • Input: 100~240V AC , 50/60Hz

Support +48V PTE

  • Output >+48V DC@0.5A
  • Input: 100~240V AC , 50/60Hz 

Current consumption (Input 48V)

  • ≤ 25W

Anti-static Grade

  • IEC61000-4-2(B)
  • Contact discharge: 4KV
  • Air discharge: 8KV

Data rate

  • 802.11a: 6/9/12/18/24/36/48/54 Mbps & Auto fallback
  • 802.11b: 1/2/5.5/11 Mbps & Auto fallback
  • 802.11g: 6/9/12/18/24/36/48/54 Mbps & Auto fallback
  • 802.11n: 6/ 6.5/ 13/ 13.5/ 19.5/ 26/ 27/ 39/ 40.5/ 52/ 54/ 58.5/ 65/ 78/ 81/ 104/108/117/ 121.5/ 130/ 135/ 162/ 216/ 243/ 270/ 300Mbps

Data modulation type

IEEE 802.11 a/b/g

  • DSSS (DBPSK, DQPSK, CCK)
  • OFDM (BPSK, QPSK, 16-QAM, 64-QAM)

IEEE 802.11n

  • OFDM (BPSK, QPSK, 16-QAM, 64-QAM)

Operating Frequency & Channels

IEEE 802.11b/g/gn 20MHz ISM Band

  • USA (FCC): 2.412GHz~2.462GHz
  • Europe (ETSI): 2.412GHz~2.472GHz
  • Japan(ARIB) : 2.412GHz~2.472GHz

IEEE 802.11gn 40MHz Band

  • USA (FCC): 2.422GHz~2.452GHz
  • Europe (ETSI): 2.422GHz~2.462GHz
  • Japan (ARIB): 2.422GHz~2.462GHz

IEEE 802.11a/an 20MHz/40MHz ISM Band

  • USA (FCC): 5.15GHz~5.25GHz; 5.725GHz~5.85GHz
  • Europe (ETSI): 5.15GHz~5.35GHz; 5.47GHz~5.725GHz
  • Japan (ARIB): 5.15GHz~5.35GHz; 5.47GHz~5.725GHz

 


Physical Specifications

  • Dimension: 213 (L) mm × 170(D) mm ×39 (H) mm
  • Weight: 500g

Environmental Specifications

  • Operating Temperature: 0 to 50°C (device) | 0 ~ 40°C 0 ~ 40°C (power adapter)
  • Storage Temperature: -10 to 55°C (device) | 20 to 90% RH (power adapter)
  • Operating Humidity: 15 to 90% RH(device) | -20 ~ 85°C (power adapter)
  • Storage Humidity: 15 to 90% RH (device) | 20 to 95% RH (power adapter)
Certifications

Item

DB81

Description

IDA Registration (SG)

Release Date

01-Oct-2014