Aztech Smart Link HomePlug AV2 600Mbps with AC Pass-Through Embarking on a concept of No New Wires® data communications, Aztech HL119EP transforms your in-house.. Product #: HL119EP

HL119EP

Aztech Smart Link HomePlug AV2 600Mbps with AC Pass-Through

Embarking on a concept of No New Wires® data communications, Aztech HL119EP transforms your in-house powerline into a networking infrastructure. Thus it successfully reduces "dead spot" and increases network coverage within your home.

Key Features:

  • Data transfer rate up to 600Mbps
  • Gigabit Ethernet port
  • SmartLink technology
  • Noise-filtered pass-through power outlet
  • Advanced Green Power saving modes
  • Enhanced Quality of Service

The Aztech HL119EP Smart Link HomePlug AV2 600Mbps AC Pass-Thru Eth Adptr embarks on a concept of No New Wires® data communications, and it transforms your in-house powerline into a networking infrastructure. It provides SmartLink Plus coupling to the Line-Neutral pair and the Line-Ground pair of the AC mains. It successfully reduce "dead spot", increase throughput and increase network coverage within a home. Surf the Internet and share data at the speed up to 1Gbps PHY rates through powerline, in any outdoor environment and rest assured with the best security from eavesdroppers through encryption on the power circuit.

HL119EP Smart Link HomePlug engine is a Qualcomm Atheros QCA7450 chipset and AR1540 AFE. It features faster processing power, Fast Ethernet host interfaces and an enhanced analog front end. The solution is compliance with IEEE1901 , Homeplug AV and Homeplug AV2, hence allowing hassle free compatibility with existing Homeplug AV devices and other suppliers of IEEE1901 PLC (Powerline Line Communication) devices.

Enhanced Quality of Service (QOS) also provides the guaranteed bandwidth reservations for multimedia payloads including TV over IP (IPTV), higher data rate broadband sharing, Online-Gaming, VoIP Calls, extending Wireless LANs coverage, Printer and peripheral sharing, Audio-Video transmission across the network as well as Network camera connectivity.


 Fuss-free Set-up with Simple Connect

No configuration or software is required to pair Aztech HomePlugs. The ""Simple Connect"" button doubles as a security feature supported with 128-bit AES Hardware encryption, ensuring the network communications is free from eavesdroppers and hackers.


 Noise-filtered pass-through power outlet

The embedded pass through electricity socket ensures that the user does not lose a wall socket, as well as it provides an AC filtering circuit to ensure that the HL113EP is isolated from locally generated AC noise sources connected to the socket.

 


Warranty Information
* 2 years

Protocol/Standards

  • IEEE 1901/HomePlug AV/AV2 Compliant 
  • Co- existence with HomePlug 1.0 Nodes 
  • Compliant to EuP requirements 
  • IEEE 802.3 10/100/1000 Ethernet(1Gbps) 
  • IEEE 802.3az support

Data Transfer Rate

  • Up to 600Mbps over powerline

Modulation Support

  • Supports OFDM 4096/1024/256/64/16/8-QAM, QPSK, BPSK
  • ROBO Modulation Schemes

Frequency Band

  • 2MHz to 68MHz band

Quality of Service

  • Priority-based CSMA/CA channel access schemes maximize efficiency and throughput
  • Integrated Quality of Service (QoS) Enhancements
  • Hardware Packet Classifiers for ToS, CoS and IP Port Number
  • Supports IGMP managed multicast session

Diagnostic and Management Interface

  • Homeplug AV generic
  • Vendor specific Management Message Entries (MME)

Security Support

  • 128-bit AES Link Encryption with key management

Noise Filtering

  • Frequency band 2MHz to 68MHz (TBD)
  • Filter characteristics : -25dB to -45dB (TBD)

AC Pass Through Power Socket

  • Current Rating: 13A max (UK), 16A max (DEU), 10A max (AUS)

Memory

  • SPI Flash : 2 MB

Hardware

  • Qualcomm Atheros QCA7450 chipset (1pc)
  • Qualcomm Atheros AR1540 chipset (1pc)

 Platform Support

  • OS Independent with TCP/IP protocol installed

 Power Supply

  • Switch Mode 85VAC to 265VAC Supply for UK/US 3-pin plugs

 LED Indicators

  • 1 x Power LED (Green)
  • 1 x Powerline Link/Activity Status LED (Bicolor)
  • 1 x Ethernet Link/Activity Status LED (Green)

External Connectors

  • 1 x Electrical Power plugs
  • 1 x RJ45 for 10/100/1000 Ethernet Push

Push Button/Switch

  • 1 x Simple Connect Push Button (Set up network password automatically)
  • 1 x Factory Default Reset Button

Resin/Plastic Casing

  • Polycarbonate, FR rating UL94-V0

Dimension

  • 116(H) mm x 62(W) mm x 42(D) mm

Weight

  • 210g

Power Consumption

  • 4.5 Watt

Platform Support

  • Windows 98SE
  • Windows 2000
  • Windows ME
  • Windows XP 32bit
  • Windows Vista 32bit
  • Windows 7(32/64-bit)
  • Windows 8

 Temperature

  • Operating : 0o to 40o Celsius | 32o to 104o Fahrenheit
  • Non-Operating : -25o to 70o Celsius | -13o to 158o Fahrenheit

Humidity

  • Operating : 30% to 80% Relative Humidity (Non-Condensing)
  • Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)
FirmwareSoftwareDocumentationsVideos
Notes:

1. Please DO NOT upgrade your device over wireless connection.

2. If the unit is working properly with the existing firmware, do not upgrade.

3. Firmware release depends from country to country, download the firmware only if you're living in the country/region.

Item

DB139

Release Date

24-Apr-2014

Item

DB131

Release Date

03-Dec-2013