This website uses cookies in order to improve user experience.If you close this box or continue browsing,you accept this policy.For more information about the cookies we use or to find out how you can disabled cookies,click here.

5.0GHz 2T2R High Power Wireless Outdoor CPE The APe 5800i is an integrated wireless access point that supports the 802.11a/n wireless standard. .. Product #: APe5800i


5.0GHz 2T2R High Power Wireless Outdoor CPE

The APe 5800i is an integrated wireless access point that supports the 802.11a/n wireless standard. Capable of fast and reliable speeds of up to 300Mbps, the APe 5800i is a Single Band Point to Point Wireless Access Bridge which focuses more on the 5.0GHz band rather than its 2.4GHz counterpart. This integrated point to point wireless access point allows for more speed and more reliability due to its less congested, and highly efficient frequency band.

Key Features:

  • Support multiple operation modes: AP/Bridge/Client/AP+Bridge
  • Add-on virtual controller mode: Simple centralized Management, Auto AP discovery and provisioning, truly plug and play
  • Wireless authentication: Open/Shared/802.1x/WPA/WPA2/PSK
  • Portal http redirect for WISP

The APe 5800i provides a wide range of 5.0GHz outdoor coverage. This allows you to maximize wide distances without experiencing interferences commonly encountered in its 2.4GHz counterpart. Through the APe 5800i, adding new area coverages can easily be handled (e.g establishing connectivity to a new building).

Like all provided Point to Point Wireless Bridges in the Wireless Access Point Solution, the APE 5800i can easily be deployed due to its passive Power over Ethernet (PoE) support which allows you to place and install this device in various optimal locations without minding the power outlet’s location. In addition, this device has been aesthetically designed with a flexible mounting kit (through steel cable tie) which allows this device to fit indoor environments such as offices, hotels, classrooms, and other similar environments.

Centralized Forwarding Architecture

Aztech AP Controller series’ centralized forwarding architecture provide following benefits:

  • All AP management and client data traffic are sent to the AC through the secure CAPWAP tunnel. Then AC forwards the wireless data traffic to the outbound network and vice versa.
  • Unified, secure wireless traffic management. 


Auto RF Provisioning

Auto Channel Selection 

  • Automatically select proper channel and assign to managed APs 
  • Readjust channels by schedule (ex. at certain time, upon a certain interval)
  • When inserting new AP, the AP scans the RF area for occupied channels and selects a channel from the available non-interfering, or clear channels. 

Auto Transmit Power Adjustment

  • Automatically adjust the power according to the strength changes of RF signals broadcasting by other APs

 Authentication and Authorization

  • Access Control by VLAN or SSID
  • URL Black & White List
  • User authentication through RADIUS server
  • User portal authentication control through built-in or external portal server
  • Wireless Authentication: Open/Shared/802.1x/WPA/WPA2/PSK

Chipset Solution

  • CPU: AR9342 
  • RF: AR9342 


  • 16Mbyte

Memory (DDR II)

  • 64Mbyte

Standard compliance

  • IEEE802.3u MDI / MDIX 10/100 Fast Ethernet
  • IEEE802.11a/n wireless LAN interface
  • IEEE 802.11n wireless LAN standard

Power Input Requirement

  • Passive PoE 15V
  • Pin 4,5 VDC+
  • Pin 7,8 VDC

Ethernet PHY

  • 10/100 Mbps


  • Internal 13 dBi directional antenna (Vertical, Horizontal)

Antenna Frequency Band

  • 5470-5725 : 5.725~5.850 GHz

Vertical Port HPBW

  • (XY Plane /H-Plane): 67º
  • (XZ Plane /E-Plane): 15º

Horizontal Port HPBW

  • (XY Plane /H-Plane): 87º
  • (XZ Plane /E-Plane): 20º

Antenna Configuration

  • 2 * 2 (2 Tx,2 Rx)

LAN Port

  • 1 port

Reset Button

  • Reset to factory default


  • Ground terminal x1

System Update Capability

  • Support Web-UI upgrade via Ethernet port or wireless network
  • Support TFTP upgrade via Ethernet port


Power (Single-color LED x1)

  • Green On: Power / system on
  • Green Off: Power / system off

LAN (Single-color LED x1)

  • Off: No Ethernet connection detected
  • Green On: Ethernet connection detected
  • Green Blinking: Sending / receiving data

5.0GHz WLAN (Single-color LED x1)

  • Green Off: WLAN disabled
  • Green On: WLAN enable
  • Green Blinking: WLAN data transmit

Signal *3 (Single-color LED x3)

  • Excellent: 3 LED Green ON
  • Good: 2 LED Green ON
  • Weak: 1 LED Green ON

Data Rate

  • 11a: 54M, 48M, 36M, 24M, 18M, 12M, 9M, 6Mbps auto fallback
  • 11n: HT20 MCS0~15, HT40 MCS0~15

Data modulation type

  • 802.11a: OFDM
  • 802.11n: OFDM

RF frequency range

  • FCC : 5725-5850 MHz
  • CE: 5470-5725 MHz (DFS band)

Power Consumption (W)

  • <12W

Average Output Power@ 25˚ (Single Chain) (± 2dBm)

Sensitivity (at single chain)

Physical Specifications

  • Dimension: 205mm(L)×64mm(W) ×61mm(H)
  • Weight: ≤ 500g
  • Enclosure: IP55

Environmental Specifications

  • Operating Temperature(Max): -20° ~ +70°C (device) | 0° ~ +40°C (power adapter)
  • Operating Humidity (non-condensing): 10 to 95% RH (device) | 20 to 85% RH (power adapter)
  • Storage Temperature: -40 ~ +70°C (device) | -20 ~ +60°C (power adapter)
  • Storage Humidity (non-condensing): 10 to 95% RH (device) | 5 to 95% RH (power adapter)